37
ENGLISH
Basic version
Simple version
Information
Advanced version
Playback in ZONE2 (Separate room)
• You can operate this unit so as to enjoy audio in a room (ZONE2)
other than the MAIN ZONE (room where the unit is located).
• You can simultaneously play back the same source in both the MAIN
ZONE and ZONE2. You can also play back separate sources in the
MAIN ZONE and ZONE2.
Audio output
ZONE2 playback by speaker output
The ZONE2 audio signals are output from this unit’s SURR. BACK/
AMP ASSIGN speaker terminals using the amplifier assignment
function.
n
Connecting and setting the speakers
“Amp Assign” setting
(
v
page 52) and audio
signals output
Connecting the speakers
ZONE2
Output signal :
Stereo (L / R)
MAIN ZONE
ZONE2
This unit
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
NOTE
It is not possible to play the digital audio signals input from the HDMI,
COAXIAL or OPTICAL connectors in ZONE2.
Playback
1
Switch
ZONE SELECT
to “ZONE2”.
The remote control unit switches to the
operating mode for ZONE2.
Input source
select buttons
2
Press
AMP
.
3
Press
ZONE/DEVICE ON
to turn
on the ZONE2 power.
The
indicator on the display lights.
• Also press input source select button when
in standby mode, the power turns on.
• When
ZONE/DEVICE OFF
is pressed, ZONE2
turns off.
• Power in ZONE2 can be turned on or off by
pressing
ZONE2 ON/OFF
on the main unit.
4
Press the input source select button.
The audio signal of the selected source is output to ZONE2.
• Turn
SOURCE SELECT
after
pressing
ZONE2 SELECT
on
the main unit to select an input
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Select “MAIN” in step 1 then
press
ZONE/DEVICE OFF
.
Adjust the volume
Use
VOL
df
to adjust the volume.
G
Adjustable range
H
– – –
–80dB – –40dB – 18dB
(When the “Volume Display” (
v
page 57) setting is “Relative”)
G
Adjustable range
H
0
–
41
–
99
(When the “Volume Display” (
v
page 57) setting is “Absolute”)
• At time of purchase, “Volume Limit” (
v
page 56) is set to “–10dB
(71)”.
Turn
MASTER VOLUME
after pressing
ZONE2 SELECT
on the main
unit to adjust the sound volume.
Turning off the sound temporarily
Press
MUTE
.
The sound is reduced to the level set at “Mute Level” (
v
page 56) in
the menu.
• To cancel, either adjust the volume or press
MUTE
again.
• The setting is canceled when the zone’s power is turned off.
