0
Getting Started
Connections
Playback
Information
Troubleshooting
ENGLISH
Specifications
Parameter
d
f
[TONE]
NIGHT
ENTER
uio p
[SURROUND
PARAMETER]
NIGHT
ENTER
o p ui
Adjust surround sound parameters.
The parameters (items) which can be adjusted differ depending upon the following conditions.
• Whether an input signal is present (when playing) or not (when stopped, etc.).
• The type of input signal
• The type of surround mode
For details of which parameters can be adjusted in each surround mode, see “Surround Modes and Parameters” (
v
page 31).
Tone Control
Turn tone adjustments on and off.
In general, we recommend the bass and treble to be adjusted to 0
dB (flat level).
NOTE
• When the EXT. IN is selected as an input source, you can neither
select the tone mode nor adjust the tone.
• Extreme settings at high volume may damage your speakers.
Operating from the remote control unit
q
Press
[TONE]
.
The display shows the currently set tone mode.
w
Press
o
p
to select the desired tone mode.
ON
OFF
e
Press
ui
to select the desired tone.
BASS
TREBLE
TONE:ON
r
Press
o
p
to adjust the selected tone as desired.
b
To complete tone adjustment, repeat the above steps 3 and 4.
b
If the tone display disappears, start from the step 1 again.
[Variable range]
–10dB
~
0dB
~
+10dB
[Variable range]
–10dB
~
0dB
~
+10dB
“Bass” and “Treble” can be set when “Tone Control” is set to “ON”.
Bass
Adjust low frequency range (bass).
Treble
Adjust high frequency range (treble).
[Selectable items]
ON
: Allow tone adjustment (treble, bass).
OFF
: Playback without tone adjustment.
[Display]
Button located on both the main unit and the remote
control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
You can change the “Bass” and “Treble” settings when you set “Tone
Control” to “ON” and press
ENTER
.
“TRBL” is displayed.
Setup
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (
v
page 15).
