Denon AVR-1509, Руководство пользователя

Страница: 30 / 56

A0 Effect Level
Adjust the strength of the surround effect.
[Variable range] 1
~
10
~
15
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
A1 Room Size
Determine size of acoustic environment.
[Selectable items]
Small
: Simulate acoustics of a small room.
Med-S
: Simulate acoustics of a medium-small room.
Med
: Simulate acoustics of a medium room.
Med-L
: Simulate acoustics of a medium-large room.
Large
: Simulate acoustics of a large room.
NOTE
“Room Size” does not indicate the size of the room in which sources
are played.
h Panorama
Assign front L/R signal also to surround channels, for wider sound.
If the surround effect seems weak, set “Panorama” to “ON”.
[Selectable items] ON OFF
j Dimension
Shift sound image center to front or rear, to adjust playback balance.
[Variable range]
0
~
3
~
6
l Delay Time
Adjust delay time to control sound stage size.
[Variable range] 0 ms ~ 30 ms ~ 110 ms
k Center Width
Assign center channel signal to front left and right channels for wider
sound.
[Variable range]
0
~
3
~
7
f LFE
Adjust the low-frequency effects level (LFE).
[Variable range] –10dB ~ 0dB
g Center Image
Assign center channel signal to front left and right channels for wider
sound.
[Variable range] 0.0 ~ 0.3 ~ 1.0
For proper playback of the different program sources, we recommend
setting to the values below.
• Dolby Digital sources: “0 dB”
• DTS movie sources: “0 dB”
• DTS music sources: “–10 dB”
d D. Comp
(Dynamic Range Compression)
Compress dynamic range (difference between loud and soft sounds).
[Selectable items]
OFF
: Turn dynamic range compression off.
Low
: Low setting.
Mid
: Middle setting.
High
: High setting.
When playing DTS sources, this is only displayed for compatible
software.
For details on adjusting individual parameters, see “Adjusting the Parameters” ( v page 25).
s Cinema EQ
Soften the treble range of movie soundtracks for better understanding.
[Selectable items]
ON
: “Cinema EQ” is used.
OFF
: “Cinema EQ” is not used.
The “Music” mode is also effective for movie sources including a lot
of stereo music.
a Mode
Select the mode to match the source (cinema source, music source,
etc.).
n
In the PL
g
mode
[Selectable items]
Cinema
: This is the mode for cinema source.
Music
: This is the mode for music source.
Game
: This is the mode for game source.
PL
: Dolby Pro Logic playback mode.
(This is the mode for 4-channel playback (front L, front R,
center, surround (MONO)).)
n
In the DTS NEO:6 mode
[Selectable items]
Cinema
: This is the mode for cinema source.
Music
: This is the mode for music source.
Operating from the remote control unit
You can operate “Cinema” mode or “Music” mode with the remote
control unit.
Press
[CINEMA]
or
[MUSIC]
.
Getting Started
Connections
Setup
Playback
Remote Control
Information
Troubleshooting
ENGLISH
Specifications