ENGLISH
30
Basic Operation
Basic Operation
ENGLISH
1
Set the input source to “TUNER”.
(Main unit)
(Remote control unit)
2
Watching the display, press the
BAND
button to
select the desired band (AM or FM).
Auto tuning
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the “TUNED”
and “STEREO” indicators turn off.
4
Press the
TUNING
(
+
) or (
–
) button.
Automatic searching begins, then stops when a station is
tuned in.
3
Press the
MODE
button to set the auto tuning
mode.
A 1 F M 8 7 . 5 0 M H z
Lights
Manual tuning
1
Set the input source to “TUNER”.
3
Press the
MODE
button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
2
Watching the display, press the
BAND
button to
select the desired band (AM or FM).
4
Press the
TUNING
(
+
) or (
–
) button to tune in
the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
Recalling preset stations
1
Watching the display, press the
SHIFT
button to
select the preset memory block.
2
Watching the display, press the
PRESET
•
(
+
)
or
ª
ª
(
–
)
button to select the desired preset
channel.
Preset stations
1
Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
3
Press the
SHIFT
button and select the desired
memory block (A to G).
2
Press the
MEMORY
button.
4
Press the
PRESET
(
+
) or (
–
) button to select the
desired preset channel (1 to 8).
• To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
5
Press the
MEMORY
button again.
• Store the station in the preset memory.
