Denon AVR-1506, Руководство по эксплуатации

Страница: 15 / 97

System Setup
ENGLISH
ENGLISH
12
Use System Setup to customize a variety of settings to suit your listening environment.
For the contents of a system menu and the initial setting of this unit (
page 17).
• You can change the settings using the buttons on the remote control unit.
• The AVR-1506 is equipped with an alpha numeric front panel display that can also be used to check and adjust settings. Some
representative front display examples are shown below.
CURSOR
MODE 1
SETUP
ENTER
Front display
System Setup
No.
* T E S T T O N E Y e s <
Press the CURSOR
F F
button to execute.
Currently selected line
* C O A X 1 C D
Current setting Currently selected line
1
Set the
MODE 1
switch to “AUDIO”.
2
Press the
SETUP
button to enter the setting.
4
Press the
ENTER
or
CURSOR
H H
button to confirm
the new settings.
* S y s t e m S e t u p
3
Press the
ENTER
or
CURSOR
H H
button to select
the setting, then press the
CURSOR
F F
or
G G
button to select the parameter.
* F r o n t L a r g e
Large Small
* C e n t e r S m a l l
Large Small None
5
Press the
SETUP
button to finish system set up.
[ Display ]
Setting the Speaker Configuration
1
Press the
CURSOR
F F
or
G G
button to select your
front speaker type, then press the
ENTER
or
CURSOR
H H
button to switch to the center speaker
setting.
* F r o n t L a r g e
Large Small
2
Press the
CURSOR
F F
or
G G
button to select your
center speaker type, then press the
ENTER
or
CURSOR
H H
button to switch to the surround
speaker setting.
* C e n t e r S m a l l
Large Small None
When “Small” has been selected for the front speakers,
“Large” cannot be selected for the center speaker.
3
Press the
CURSOR
F F
or
G G
button to select your
surround speaker type, then press the
ENTER
or
CURSOR
H H
button to switch to the surround
back speaker setting.
* S u r r . S m a l l
Large Small None
When “Small” has been selected for the front speakers,
“Large” cannot be selected for the surround speakers.
The composition of the signals output to each channel and the
frequency response are adjusted automatically according to the
combination of speakers actually being used.