Denon 5805 - AVR AV Receiver, Руководство по эксплуатации

Страница: 59 / 214

59
Basic Operation
2 Parameters
MODE:
• DH1:
Reference room (small room with weak reverberations).
• DH2:
Live room (room with a bit stronger reverberations than DH1).
• DH3:
Large room (larger room than DH1, offers a sense of
distance and sound diffusion effects).
• BYPASS:
Stereo sound.
DECODER:
Select this when playing analog, PCM or other 2 channel
sources.
The signals are converted into multichannel signals using
the decoders shown below and played in the Dolby
Headphone mode.
• PL
II
C:
Dolby Pro Logic II Cinema mode.
• PL
II
M
Dolby Pro Logic II Music mode.
• NEO:6 C:
DTS NEO:6 Cinema mode.
• NEO:6 M:
DTS NEO:6 Music mode.
• OFF:
The signals are played in the Dolby Headphone mode as
such (2 channels).
The Dolby Headphone
• The Dolby Headphone mode is set when headphones are
connected to the PHONES jack while in the STANDARD
(DOLBY/DTS SURROUND) mode.
1
Press the
SURROUND PARAMETER
button.
• The surround parameter menu appears.
2
Press the
CURSOR D D
or
H H
button to select the
parameter.
3
Press the
CURSOR F F
or
G G
button to select the
setting.
4
Press the
ENTER
or
SURROUND PARAMETER
button to complete the setting.
USER MODE function
• The AVR-5805CI is equipped with a function for storing the
selected input source, the auto surround mode and input
mode in the memory and selecting these settings when you
want to use them.
• Three patterns of settings can be stored in the memory
pressing the USER MODE buttons.
1
The following are stored in the memory:
q
Currently set input source
w
Currently set auto surround mode
e
Currently set input mode
2 Storing the settings in the memory
2
Press and hold the
USER MODE
button until
the “ USER MODE” indicator lights.
Press the
USER MODE
button at which the settings
you want to call out are stored.
• The user mode indicator lights.
The indicator turns off if you perform any operations that
change the settings stored at the
USER MODE buttons.
2 Calling the settings out
• When RECOUT mode is set to “SOURCE”, with this
amplifier signals encoded in the Dolby Headphone mode can
be output from the recording output terminals and recorded
on another recorder (
page 101).