Denon 5805 - AVR AV Receiver, Руководство по эксплуатации

Страница: 50 / 214

50
Basic Operation
HOME THX CINEMA
ENTER
SURROUND PARAMETER
SURROUND BACK
DIRECT/STEREO
CURSOR STATUS PURE DIRECT
ON SCREEN
CURSOR
DIRECT/STEREO
PURE DIRECT
HOME THX
CINEMA
SURROUND
PARAMETER
ENTER
Press the
DIRECT/STEREO
button to select the
STEREO mode.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired
sound.
• The system setup function cannot be used when the PURE
DIRECT mode is set. To use the system setup function,
cancel the PURE DIRECT mode.
• If the HDMI input terminal is selected, video outputs are
output in the PURE DIRECT mode.
• The channel level and surround parameters in the PURE
DIRECT mode are the same as in the DIRECT mode.
Playing audio sources (CDs and DVDs)
2 channel playback modes
Press the
PURE DIRECT
button to select the PURE
DIRECT mode.
• The AVR-5805CI is equipped with three 2 channel playback
modes exclusively for music.
• Select the mode to suit your tastes.
2 PURE DIRECT mode
This mode reproduces the sound with extremely high
quality. The audio signals do not pass through the tone
circuits, etc., and the display and surrounding circuits that
could affect the audio signals are turned “OFF”.
Press the
DIRECT/STEREO
button to select the
DIRECT mode.
The mode switches as shown below each time the
DIRECT/STEREO button on the main unit is pressed.
2
DIRECT mode
Use this mode to achieve good quality 2 channel sound. In
this mode, the audio signals bypass such circuits as the
tone circuit and are transmitted directly, resulting in good
quality sound.
STEREO DIRECT
When press SURROUND PARAMETER :
The subwoofer output can be controlled directly.