5
Rear Panel
1.
Power Input:
Use the included power cable to connect this input to a power outlet.
2.
Analog In (unbalanced RCA):
Use RCA cables to connect an external audio source to these
inputs.
3.
Analog Out (unbalanced RCA):
Use RCA cables to connect these outputs to external speakers,
sound system, etc.
4.
Analog Out (balanced XLR):
Use XLR cables to connect these outputs to external speakers,
sound system, etc.
5.
Digital Coaxial In/Out:
Use digital coaxial RCA cables (IEC60958 Type II S/PDIF compatible) to
connect this input and output to your sound system.
6.
Digital Optical In/Out:
Use digital optical TOSLINK cables (IEC60958 Type II S/PDIF
compatible) to connect this input and output to your sound system.
Setup
Important:
Connect all cables securely and properly (with stereo cables: left with left, right with
right), and do not bundle them with the power cable.
1.
Use stereo RCA cables, a digital coaxial cable, or a digital optical cable to connect the outputs
of your audio sources to the
Inputs
(
unbalanced
or
digital
) of DN-300CR.
2.
Use XLR cables, stereo RCA cables, a digital coaxial cable, or a digital optical cable to connect
the
Outputs
(
balanced
,
unbalanced
, or
digital
) to the analog or digital inputs of your external
receiver, amp, powered monitors, etc.
3.
After completing all the connections, use the included power cable to connect the
Power Input
to a power outlet.
4.
Power on all of your input sources.
5.
Power on DN-300CR.
Items not listed under
are sold separately.
Mixer
Receiver
Power
Powered Monitors
1
2
3
4
5
6
Содержание DN-300CR
Страница 2: ...2 ...
Страница 60: ...denonpro com Manual Version 1 4 ...
