Denon Professional DN-300CR, Быстрый старт

Страница: 3 / 60

3
Quickstart Guide (English)
Introduction
Please see this guide’s
Setup chapter to learn how to integrate DN-300CR with your audio system,
and then refer to the Operation chapter to start using DN-300CR.
Box Contents
DN-300CR
Power Cable
Remote Control
Quickstart Guide
Safety & Warranty Manual
Note: Visit denonpro.com to download
the full User Guide .
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit
denonpro.com .
Safety Instructions
Before turning the power
on: Make sure all connections are secure and correct and that there are
no problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is
powered off. When the unit will not be used for long periods of time,
disconnect the power cable from the power outlet.
Proper ventilation: If the unit is left in a room which is not properly ventilated or is full of
smoke from cigarettes, dust, etc. for long periods of time, the surface
of the optical pickup may get dirty, causing incorrect operation.
About condensation: If there is a major difference in temperature between the inside of the
unit and the surroundings, condensation may form inside the unit,
causing the unit not to operate properly. If this happens, let the unit
sit for an hour or two while powered off, and wait until there is little
difference in temperature before using the unit.
Cautions on using mobile
phones: Using a mobile phone near this unit may cause noise. If this occurs,
move the mobile phone away from this unit when it is in use.
Moving the unit:
Before moving the unit, turn off its power and disconnect the power
cable from the power outlet. Next, disconnect its connection cables
from other devices before moving it.
About care: Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic
solvents to clean the unit. These materials can cause material
changes and discoloration.
Rackmount warnings:
(required rack specifications for
mounting the unit in a rack)
EIA standard 19-inch (48.3 cm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that can support this device
Rack installation: This product will work normally when the player
unit is mounted within 10° off the vertical plane
at the front panel. If the unit is tilted excessively,
the disc may not load or unload properly. (See
image)
Unit
Maximum
10°