Denon Professional DN-300CR, Быстрый старт

Страница: 7 / 60

7
Playback
This section explains how to playback CD/CD-R/CD-RW media inserted in the
Disc Slot , and how to
playback MP3 format audio files from media such as CD-ROM.
Basic playback operation
1.
If you are monitoring through headphones, connect your headphones to the Headphones Jack
and turn down the Headphones Volume .
2. Press the Power switch to turn on the unit.
3. Insert a disc into the Disc Slot with the label side up. The display will indicate “ Loading ”.
When the disc has been read, playback will be stopped at the start of the first track on the disc.
4. To start playback , press the Play button. Operate the connected monitor system or the
Headphone Level control to adjust the monitor level appropriately.
To pause playback, press the Pause button. Press the Play button again to resume playback.
To stop playback, press the Stop button.
Note: Unless otherwise specified, the explanations in this manual assume that the playback mode is
set to Continue Play. See the User Guide for more details.
Selecting a song
To skip to the previous or next track number:
1. Turn the Jog Wheel on the unit left to select the previous track, or right to select the next track.
You can also press the Skip buttons on the remote control.
2. Press the Play button to begin playing the selected track. Press the Pause button to move to the
beginning of the selected track and enter pause mode.
To specify a track number:
1. Use the 0-9 buttons on the remote control to enter a track number (maximum three digits). Enter
the track number starting with the highest-place digit. For example, to specify track 1, press the
1 button once. To specify track 12, press the 1 button, then the 2 button. To specify track 103,
press the 1 button, then the 0 button, then the 3 button.
2. When the track number in the display flashes, press OK on the remote to select the track.
3. Press the Play button on the remote control to begin playing the selected track.
Track search
During playback (or while paused), you can search to find the portion of the track you want to hear
by fast-forwarding or rewinding.
To search a track:
1. Play or pause the desired track.
2. Hold down one of the Search buttons on the remote control.
3. To stop searching, release the Search button. You will return to the state (playing or paused) in
which you were before searching.