8
OPERATING INSTRUCTIONS
TO COMMENCE CUTTING
•
Depress the “Deadmans Handle” (Item 15)
•
Push the “Cylinder Control Lever” (Item 16) forwards.
•
Push the “Drive Control Lever” (Item 14) forwards.
•
Set the “Throttle Control Lever” to increase / reduce speed.
TO STOP CUTTING
•
Pull the “Drive Control Lever” (Item 14) backwards.
•
Pull the “Cylinder Control Lever” (Item 16) backwards.
•
Release the “Deadmans Handle” (item 15)
NOTE –
Releasing the “Deadmans Control Lever” with the cutter engaged will cause the engine to stop.
FITTING THE GRASSBOX (Item 9)
•
Disengage the cylinder drive and wait for the cutter to stop rotating.
•
Hold the grassbox firmly on the lid of the aperture, place the lower front of the box against the front of the tubular cradle.
•
Pivot the box about the cradle until it sits securely in position.
SP20038_REV0
OCTOBER 2017
