2
CERTIFICATE OF CONFORMITY
G-Series Cylinder mowers powered by Honda GX Petrol Engine
Manufacturer:-
Howardson Ltd, Howardson Works, Kirk Langley, Derby, DE6 4NJ. UK
Owner of Technical Document:-
Mr I.D. Howard, Howardson Ltd, Howardson Works Kirk Langley, Derby, DE6 4NJ, UK
I the under signed Declare that these machines:-
The reliability and quality of performance of the
DENNIS G-SERIES
depends upon some simple care maintenance
carried out regularly. This manual has been prepared to allow the user to carry out all such work.
It is advisable to read the instructions carefully. Proper care and attention will enable the machine to give a continuous,
satisfactory, and reliable service. Failure to carry out regular lubrication and maintenance as outlined in this manual may
render any guarantee or warranty invalid.
In the case of any difficulty, or if further information or advice is required, our Service Department is always at your call. In
the interests of speed and accuracy of information please quote the serial numbers of the machine and engine when
making enquiries.
For the machine, this is to be found on a plate attached to the side frame. The engine number is stamped
on either the crank case or the gear casing facing towards the front of the machine. We suggest you write
the numbers on the front page of this book.
INTRODUCTION
SERIAL NUMBERS
Tested at:-
Howardson Works test site September 2011
Complies with the applicable requirements of:-
- Machine Directive
2006/42/EC
- Noise Directive
2000/14/EC (Annex VI Procedure 1)
Ian Howard
Managing Director
NOTE:-
MAKE A NOTE OF THE SERIAL NUMBER OF YOUR MACHINE AND ALWAYS
QUOTE IT IN ANY COMMUNICATION WITH PERSONNEL AT DENNIS.
MACHINE SERIAL NUMBER
ENGINE SERIAL NUMBER
Model
Cutting Width
Power (Honda)
Measured Sound Power Level
Guaranteed Sound
Power Level
Serial Number
G26D
26” (660mm)
GX160
95 Lwa
98dB Lwa
See product ID Range
G30D
30” (760mm)
GX160
95 Lwa
98dB Lwa
See product ID Range
G34D
34” (860mm)
GX200
95 Lwa
98dB Lwa
See product ID Range
SP20038_REV0
OCTOBER 2017
