4
Machine Description
NUMBER
PART
NUMBER
PART
1
Cylinder
9
Grass Box
2
Bottom Blade Adjuster Knob
10
Cutting Height Adjustment
3
Belt Guard
11
Cassette Retaining Pin
4
Throttle Control Lever
12
Cassette Control Lever
5
Operating Console
13
Air Filter
6
Exhaust
14
Driving Control Lever
7
Fuel Tank
15
Deadman's Handle
8
Brake lever
16
On/Off Switch
Manufactured with a 26” (66cm), 30” (76cm) or 34” (86cm) cutting width, this range of machines are powered by either a 5.5hp
(26” & 30”) or 6.5hp air cooled, single cylinder, four stroke petrol engine.
The rear roller and cutter are controlled independently via belt clutches operated from the console on the upper handle bar.
(ITEM 5). A parking brake is fitted for added safety when working on sloping ground.
In the design of the machine, special attention has been given to the importance of easy service and maintenance with the
construction based on a sectional assembly system. These are the Engine Unit, the Cylinder Unit, the Rear Roller Unit and the
Front Roller Unit, each of which can be readily removed individually from the main Frame Chassis Unit.
The interchangeable cassette system allows a variety of cassettes to be used for varying applications.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SP20038_REV0
OCTOBER 2017
