22
CO2 plant fertilization system
CarboPOWER E400 + Special Edition / CarboPOWER M400 + Special Edition
CarboPOWER F Special Edition / Pressure reducer CarboPOWER
For CO2 fertilization of aquariums.
- Instructions: Please read carefully. Save these instructions for future reference. -
Congratulations on your purchase of this premium CO2 fertilization system by Dennerle. When used and cared for properly, this system
gives you a convenient, reliable and precise way to supply your aquarium with CO2, the most important fertilizer for aquarium plants -
for magnificent plant growth.
Dennerle wishes you years of enjoyment and pleasure with your aquarium!
EN
Safety regulations for carbon dioxide (CO2) bottles
CAUTION
• Contains pressurised gas; can explode if heated.
• Protect against direct sunlight. Keep in a well-ventilated place.
• Keep out of reach of children.
• Handle with care. Do not throw. Do not open with force.
• Store in a cool place. Protect against temperatures over 50 °C. Do not store in the cellar.
• Do not breathe in CO2 gas; it has an asphyxiating effect in high concentrations. In case of gas
escaping, ventilate the room well.
• Use only for providing CO2 supply to aquariums.
• Perform CO2 extraction only with suitable pressure reducers for Dennerle disposable CO2 bottles with
M10 x 1.25 connection thread or reusable CO2 bottles with W21.8 x 1/14“ connection thread.
• reusable CO2 bottles: Refill only at authorised CO2 filling stations. Please note: Tare weight without valve and cage (valve
protection cage).
• Perform CO2 extraction only from upright bottles. Secure bottle to prevent from falling over.
• Be careful when transporting single bottles in vehicles: Make sure they are well-secured to prevent them from slipping
and rolling around, otherwise the valve can be damaged and CO2 gas can escape. Ensure adequate ventilation.
Safety regulations CO2 magnet valve
• For use with 230 V/50 Hz alternating current only.
• For indoor use only.
• The power plug must be accessible at all times after the magnet valve has been installed.
• Always ensure effective cooling – do not cover the device.
• All device cables in or on the aquarium must have a drip loop attached so that any water running down
cannot reach the equipment and/or the power outlet.
• Before performing any work on the magnet valve (e.g. cleaning, assembly), the device must be completely
disconnected from the power supply by pulling out the power plug.
• If the magnet valve accidentally falls into the aquarium, immediately pull out the power plug – do not reach into the
aquarium!
• The connection cable of the magnet valve cannot be replaced. If the cable is damaged, the equipment must be taken out
of use.
• The magnet valve may only be operated in combination with genuine pressure reducers, e.g. Dennerle CarboSTART,
CarboPOWER. Simple restrictor valves are not permissible, as the maximum permissible operating pressure of 5 bar
could be exceeded.
Содержание CarboPOWER E400
Страница 3: ...19 20 21 22 23 24 25 26 27 28 29 30...
Страница 4: ...3 5 2 4 6 7 8 9 10 Special Edition CarboPOWER M400...
Страница 47: ...47...
Страница 48: ...48 1 10686 0420...