![background image](http://html1.mh-extra.com/html/marineland/eclipse-hex-5/eclipse-hex-5_quick-setup-manual_1727373001.webp)
Start Here
-
The Eclipse HEX
5
Quick Setup Guide
1
3
4
5
2
A.
Add gravel, rock, and
decorations with aquarium
Frame securely in place.
B.
Add water
and BIO-Safe.
Water line
1/2 pack for
5 gallon tank
Frame ON
A.
Attach Intake
Assembly to
Pump/Filtration
Assembly
B.
Install Filtration Assembly
onto Aquarium Frame
C.
Remove paper from
BIO-Wheel and reinstall
D.
Rinse Filter
Cartridge
Intake
Assembly
Hex
5
Aquarium
Tank
Light Hood
Filtration Hood
Pump Filtration
Assembly
BIO-Wheel
Filter
Cartridge
Sample food
and water conditioners
New Aquarium Guide,
BIO-Wheel Information
and Registration Card
Rite-Size
Cartridge sticker
Light Lens
Cover
A.
Route Filtration
Power Cord
Aquarium
Frame
B.
Replace Light
Hood and route
Light Power Cord
To keep moisture away and extend lamp life,
this cover MUST be in place.
Cord Routing
Verify the Contents
Fill Aquarium
Filtration Assembly
Install Light
Lens Cover
E.
Install Filter Cartridge
into Filtration Assembly
NOTE: Drip Loop
C.
Replace
Filtration Hood
Adding Fish:
Allow your Eclipse HEX
5
to operate for at least a few hours and preferably 24 hours before
adding any fish. Start with just 1-2 fish. Add more fish gradually over a 4-6 week period. Some fish require
a heater. Questions or missing parts call customer service at
(800) 322-1266
or visit
www.marineland.com
.
9/06 10318
Light
Switch