DAEnetIP2
User Manual
12 Sep 2013
6.1.14. Broadcast frames
In this mode DAEnetIP2 does not response of frames with MAC address FF-FF-
FF-FF-FF-FF. This allows DAEnetIP2 to hide from the world because it doesn’t
respond to ARP requests.
6.1.15. Web server
Enable/disable web access.
SNMP: Change its bit in cfgNewMode.0
Web: Menu „Setup-> Web server”
IMPORTANT!
The WEB access may be allowed only after SNMP command (and of course after
loading the default settings). If however the SNMP access is disabled, then the allowing of the WEB
server may be done only after hardware loading of the default settings.
From this section the web port may be changed also. The port must be in range
from 1025 up to 65535. The attempt to assign port from 1-1024 will be accepted as
80. After setting this parameter, the DAEnetIP2 module will be restarted. After
changing this port, the url address must be something like this:
http://172.16.100.2:port
SNMP: Change cfgHTTPport.0
Web: Menu „Setup->Miscellaneous/ Web server ...on port ”
-
17
-
