DAEnetIP2 v2
User Manual
21 Apr 2020
- 35 -
11.2. Connect DAEnetIP2 v2 to router
1. Do all the steps from
point
11.1
2. Adjust the network parameters from
Setup
page
:
2.1. IP - must be in same network as your router. (For example if router IP is 192.168.1.1,
DAEnetIP2 v2
IP may be 192.168.1.2)
2.2. Mask
2.3. Gateway - usually this is the IP of your router
3. Click submit and wait about 5 seconds
4. Power off the device
5. Now you may disconnect the UTP crossover cable from the
DAEnetIP2 v2
and your
computer
6. Connect the
DAEnetIP2 v2
module and the network router with
UTP straight cable
.
7. Adjust the IP of your computer to be again in the router network
8. Open the web browser and enter the new IP of the module.
Figure 11.2.
DAEnetIP2 v2
connected to router
Содержание DAEnetIP2 v2
Страница 6: ...DAEnetIP2 v2 User Manual 21 Apr 2020 6 3 3 Watchdog function Figure 3 3 Example 3...
Страница 49: ...DAEnetIP2 v2 User Manual 21 Apr 2020 49 14 4 2 Node RED Figure 14 5 Node RED...
Страница 55: ...DAEnetIP2 v2 User Manual 21 Apr 2020 55 18 Appendix 12 Mechanical drawing Figure 17 4 Mechanical drawing...
