Rev. 02/01/18 VER SMS-DYGP-PLUS-FREEFILL20170828-EN
29
[DY-GP Plus].
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less
than 3 V/m.
Table 4
Recommended separation distances between portable and mobile RF
communications equipment and the [DY-GP Plus]
The [DY-GP Plus] is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of
the [DY-GP Plus] can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the [DY-GP Plus] as
recommended below, according to the maximum output power of the
communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of
transmitter
m
150kHz to 80MHz
d=1.2
80MHz to 800MHz
d=1.2
800MHz to
2.5GHz
d=2.3
0,01 / 0.12
0.23
0,1 / 0.38
0.73
1 / 1.2
2.3
10 / 3.8
7.3
100 / 12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
WARRANTY REGISTRATION FORM
Item Name:
Model Name:
Serial No.:
Date of Purchase:
Name:
Address:
Phone:
Email:
Name of Distributor:
Authorized Distributors:
Stamp and Signature
