manualshive.com logo in svg

Denali CANsmart Controller GEN II, Инструкция по эксплуатации

Поделиться
Скачать
Denali CANsmart Controller GEN II Скачать руководство пользователя страница 8

DENALIELECTRONICS.COM

6. Software Overview 

(continued)

6.7 - Turn Signals

The turn signal circuit enables the addition of an auxiliary turn signals without having to tap into the bikes factory turn signal harness.

6.8 - Run/Brake/Turn

The run/brake/turn signal circuit enables the addition of an auxiliary run brake turn signals complete with flash patterns, all without having to tap into the bikes 

factory turn signal or brake harness.

6.9 - Heated Gear

The heated gear circuit enables heated gear to work in conjunction with the motorcycles factory heated grip settings. The temperature of the heated gear can be 

adjusted from 0%-100% for each stage the motorcycle has for the factory heated grips.

6.10 - Where To Download The Software

The CANsmart™ Accessory Manager Software is available for both Windows and Mac operating systems. To download your copy please visit 

WWW.DENALIELECTRONICS.COM/BMW

Step One:

 Remove the protective cap from micro USB port on the end of the CANsmart™ Controller.

Step Two:

 Plug the provided programming cable into the CANsmart™ Controller, and plug the other end into your computers USB port.

Step Three:

 Open the CANsmart Accessory Manger Software and turn the motorcycle’s ignition to the “ON” position. 

6.11 - Connecting The Device To The Software

Programming Cable

Cap

CANsmart

Содержание CANsmart Controller GEN II











Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды