Horn Extension
DENALIELECTRONICS.COM
6. Software Overview
6.1 - Circuit Function Selector
The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the
drop down menu and make your selection from the list of available circuit functions. Continue reading for an overview of each circuit function and its available
settings.
6.2 - Auxiliary Lights One (Pair or Split)
The Auxiliary Light One circuit function enables independent adjustment of high and low beam brightness right from the vehicle's original switches. Available
settings include “Off when turn signal active”, “Flash when turn signal active”, “Strobe when horn active”, “Strobe on flash to pass”, “Inverse flashing when
hazards active” as well as “Modulation”. “Three-Wire dimming mode” can be turned off to properly dim LED lights which do not have a dedicated 3rd dimming
wire. From the extra settings window you can adjust the “Strobe Intensity” as well as the “Modulation variation”.
