CAN bus Connector
Brake Light Wiring Adapter
3.2 - Horn (Blue Circuit)
3. Connecting Accessories
(continued)
DENALIELECTRONICS.COM
3.3 - Brake Light (Yellow Circuit)
Step One:
Plug the male 2-pin connector of the Horn Extension into
blue horn circuit on the CANsmart™ Controller.
Step Two:
Begin routing the harness toward the front of the bike.
Secure the harness to the vehicle’s frame along the way with the
included zip ties. Be sure to avoid any moving components such as
radiator fan blades or suspension.
Step Three:
Plug the spade connectors of the Horn Extension into the
DENALI SoundBomb Horn. The Green wire connects to the positive (+)
terminal on the horn, the Black wire goes to the negative (-) terminal.
Brake Light
Brake Light Wiring Adapter
Step One:
Route the harness of the DENALI B6 Brake Light from the
rear of your motorcycle toward the CANsmart™ Controller.
Step Two:
Plug the Brake Light Pigtail into the connector on the DENALI
B6 Brake Light.
Step Three:
Plug the male 2-pin connector of the Brake Light Pigtail
into the yellow brake light circuit on the CANsmart™ Controller.
SoundBomb™ Horn
Horn Extension
