demig Prozessautomatisierung GmbH
2
•
Chapter: Introduction
Manual Terminal DE-BT 1000
1.1.4.
Structure of the Operating Instructions
All security advices in this operating manual are marked with this symbol:
Further information is shown in a frame with the headline information. Security
functions are marked with the following symbol:
1.1.5.
Security Symbols
The following security symbols are shown on the terminal:
Attention! An incorrect connection of the device may lead to system
disturbances, - damages, quality losses as well as danger to persons
and environment. The connections not marked directly at the
controller are explained in the corresponding documentation
(Operating Instructions, Pin Assignment Cards).
Protective ground wire (min. 6mm² cross section!)
1.1.6.
Disclaimer
Possible errors cannot be excluded. demig Prozessautomatisierung GmbH
assumes neither a legal responsibility nor the liability for misprints, wrong
information and/or omissions or the resultant damages. Suggestions for
improvement and advice are always welcome.
All rights reserved!
W ar ni n g :
!
Notice:
!
!
Содержание DE-BT 1000
Страница 4: ......