demig DE-BT 1000, Руководство пользователя

Страница: 13 / 25

demig Prozessautomatisierung GmbH
Manual Terminal DE-BT 1000 Chapter: Introduction
•
9
1.3.4. Service Menu
In this dialog maintenance work at the DE-BT 1000 can be done. The dialog is as
follows:
When leaving this dialog with “Cancel” you return to the menu. Furthermore, you
have the possibility to select one of the following nine menu points with “OK” .
1.3.4.1. DHCP activate DHCP
Selecting this menu point, the DHCP-server assigns a new IP address to the terminal.
Thus, the terminal is achievable with the new IP address.
1.3.4.2. SHOW_NET show network settings
In this menu point, you can see the current network configuration. The IP-address, the
subnetmask and the network status are shown.
1.3.4.3. UPD_MOD start update mode
To install new updates, the terminal can be set in the update mode (in addition to the
way described in 1.3.1.7) by means of the menu point
„start update mode“. The update
can be installed with the File Transfer Manager (FTM).
1.3.4.4. INST_UPD install update
In case the update was transferred to the terminal and not directly installed you can do
the now with the menu point
„install update [ ]“ . Between the square brackets is the
update´s file name.
1.3.4.5. SHOW_UPD show update history
The update history (installation dates of the updates) can be shown by the menu point
„show update history.