7.
The display should read "7" plus a flashing number,
is the
"minute". Change to read '24'. Press both switches
done.
Value can be set from
At this time, the seconds are set to
all the information is saved. The display will go back to '99 0'.
B.
OPTIONS
While in the setup mode, the display will read '99
Increment
the display to read '99 1'. Press both switches at this time to set
options as follows:
The display will now show
x'
or '1'). Press the red or
black I white switch to set the options in the list below to either
or
Display
Description of Options Revisions
7K
print serial on receipt
'11
time
in 12 24 hour format
'12 x'
dual rear sensors (112 ticket detect)
Rev
detect lsec
'13 x'
printing barcode on receipt
'14 x'
look for holes in tickets
'15 x'
sending
digit in
(1st machine code digit dropped if enabled)
'16
operation- Note: Jumpers
on BCR-1000 must be changed to switch from
reading holes or reading barcodes on tickets
print text below barcode
NOTE: Options 16
17 used in Revs 25T
Version 2 Rev.
K
Up.
C.
Machine number, minimum tickets required,
bucket setting,
error adjust, paper length setting
audits.
While in the setup mode,
display will read '99
Increment
the display to read '99 2'. Press both switches at this time to adjust
the values mentioned as follows:
PAGE
3
