Deltec TC 2060, Руководство по эксплуатации

Страница: 16 / 34

Operation with Ozone
The Skimmer can be operated with ozone up to max. 50 mg/h per pump. One air
connection of the ozoniser should be connected via a suitable silicon hose to the protein
skimmer pump. The air is automatically sucked in the ozoniser by the skimmer pump.
Should the skimmer performance deteriorate please check the ozoniser for blockage.
Fresh salt water
If the skimmer is used with new water it is common to find an excessive quantity of small
bubbles and often the skimmer cup fills with a clear liquid. This is due to the high surface
tension of the new water which prevents the bubbles from bursting. Once the water
matures this effect will go away but it can take up to 2-3 weeks. The effect is different on
different salt brands and is often dependant on levels of conditioning agents added to the
salt. Once these are skimmed out then the skimmer will act normally.
Heavier feeding in the initial stages will give the chemically pure water something to react
with and allow it to mature into proper aquarium salt water rather than the initial chemical
soup which is new salt water.
Technical Data
Dimensions
mm
Aquarium size
litre
Wather flow rate
litre/h
Power
consumption
Watt
Air
litre/h
Connections Ø
mm
technical
data
TC Serie
Footprint height
Height
under
outlet
pipe
high
stocking
normal
stocking
min. max. min. max. min. max. Feedline Outlet
TC 2060 280x400 600 281 1400 1700 1400 2500 19 22 1100 1300 32 50
TC 2560 320x430 600 270 2000 2400 2000 3600 29 34 1500 1800 32 50
TC 3070 380x450 700 265 4000 4800 2200 3600 58 68 3000 3400 32 50
TC 3070S 380x450 680 265 5000 6000 2200 4000 64 74 3400 3800 32 50
TC 4080 570x590 780 280 8000 10000 8000 9000 99 111 5100 5700 40 63
TC 4580 640x690 780 280 11000 14000 10000 12000 132 148 6800 7600 40 63
-16-