DeltaOHM HD32.1, Руководство по эксплуатации

Страница: 5 / 158

HD32.1
- 5 -
V2.1
The operating program A: Microclimate Analysis displays also:
•
The local turbulence intensity Tu , for DR (Draught Rating) calculation.
•
The WBGT index (Wet Bulb Glob Temperature) with or without solar radiation.
•
The WCI index (Wind Chill Index)
•
The average radiation temperature t
r
.
The operating program B: Discomfort Analysis, HD32.1, can simultaneously detect the
following quantities:
•
Air temperature detected at head height (1.7 m for a standing person; 1.1 m for a seated
person).
•
Air temperature detected at abdomen height (1.1 m for a standing person; 0.6 m for a seated
person).
•
Air temperature detected at ankle height (0.1 m).
•
Temperature at floor level.
•
Temperature of the net radiometer.
•
Net radiation.
•
Radiant asymmetry temperature.
The operating program B: Discomfort Analysis is used to calculate the local discomfort indexes
due to vertical temperature gradients or radiant asymmetry temperature.
The
operating program C: Physical Quantities, HD32.1, can simultaneously detect the following
physical quantities:
•
Temperature
•
Relative humidity
•
Illuminance, luminance, PAR, irradiance
•
Wind speed
•
carbon monoxide concentration CO.
•
carbon dioxide concentration CO
2
By using the operating program C: Physical Quantities, HD32.1 can simultaneously manage
up to six different probes complete with SICRAM module: one or two light probes and a probe for
each of the other physical quantities. If two or more probes of the same physical quantity are
connected (light probes excluded), the instrument recognizes only one probe . If, for example,
you insert two Pt100 temperature probes complete with SICRAM module to inputs 1 and 2, the
probe connected to input 1 is immediately recognized while the probe connected to input 2 is
ignored.
The probe is detected during turn on , therefore if a probe is changed, it is necessary to
turn the machine off and on. During turn on the instrument performs a scan from input 1 to input 8.
The probes arrangement in relation to the inputs is arbitrary, except for the vane probes.
The vane probe, complete with SICRAM module, for wind speed measurement can be
exclusively connected to input 8.