DeltaOHM HD32.1, Руководство по эксплуатации

Страница: 33 / 158

HD32.1
- 33 -
V2.1
fig. 1-a : Display of the measurement using the Pt100 SICRAM probe
fig. 1-b : Display of the measurement using the combined humidity/temperature SICRAM probe
fig. 1-c : Display of the measurement using the combined speed/temperature SICRAM probe
fig. 1-d : Display of the measurement using the photometric/radiometric SICRAM probe
fig. 1-e : Display of the measurement using the CO
2
SICRAM probe
fig. 1-f : Display of the measurement using the CO SICRAM probe
By pressing
SHIFT FNC
, a drop-down menu is shown with the following information:
•
unit : allows selection of measuring unit for the actual variable.
•
data: Allows display of the maximum, minimum, and average values.
•
section: Allows setting the pipeline section for flow rate calculation
•
Cal CO2 : allows starting of calibration procedure for the CO
2
probe.
•
Cal CO : allows starting of calibration procedure for the CO probe and sensor change.
4.3.1 Setting the pipeline section
Proceed as follows to access section function:
•
Use SHIFT FNC to open the drop-down menu;
•
Use the arrow keys ▲▼ to select section ;
•
Press ENTER to confirm;
•
The Shortcut menu will appear:
•
Use the ▲▼ navigation keys to select section and press enter . The following screen will
appear:
•
Use the ◄► navigation keys to highlight the digit in the section. Use the ▲▼ navigation
keys to modify the highlighted digit.
The area comprised must be between 0.0001 m
2
(1 cm
2
) and 1.9999 m
2
.
Press ◄► to
select the digit
Press
▲▼
to
modify the digit