VIVOTEK
24 - User's Manual
LED Definitions
Item LED status
Description
LED Definition
1
Steady
Red
Powered and system booting, or network
failed
Red
LED off
Power off
Green
LED off
Network is disconnected
2
Steady
Red
and
Green
LED blinks every 1
sec.
Connected to network
3
Green
LED blinks every 1 sec. and
RED
LED
blinks consecutively every 0.15 sec.
Upgrading firmware
4
Green
and
RED
blink
every 0.15 sec,
Green
and
RED
light on, then blink again.
Restoring defaults
5
RED
LED is on,
Green
LED blinks and
RED
LED is constantly on.
Status after a reset (network connected)
Green
and
RED
LEDs are constantly on.
Status after a reset (network
disconnected)
The reset button is used to reset the system or restore the factory default settings.
Sometimes resetting the system can return the camera to normal operation. If the system
problems remain after reset, press the reset button longer to restore the factory settings
and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for
the Network Camera to reboot.
Restore: Press and hold the recessed reset button for at least several seconds to restore.
Note that all settings will be restored to factory defaults.
Micro SD/SDHC/SDXC Card Capacity
This network camera is compliant with
SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB / ,
and up to 512 / 1024GB
and other preceding standard SD cards.