SUB_1G (N3)
■ Install SUB_1G to inverter.
Save the nut after
antenna installed.
13mm Open end wrench
Use the wrench to lock antenna with 1.2 N
•
m torque.
Remove the nut.
SUB_1G (N2)
SUB_1G
Inverter
comm. module
Red
Black
White
Green
VCC
GND
D+
D-
■ Install SUB_1G to inverter.
■
Refer the figure and connect each wire
to the communication card of inverter.
* Screw torque required for
assembling: 1.6 N.m
2.5.Download the APP
MyDeltaSolar
1. This APP should collocate with Delta Inverter.
2. If inverter is not connected to cloud, you still can monitor inverter operation by APP.
3. Scan QR code for APP operation manual.
Where can search for MyDeltaSolar APP?
- QR Code: Please scan the QR code to MyDeltaSolar cloud.
- IOS system: Please search “MyDeltaSolar” in App store.
- Android system: Please search “MyDeltaSolar” in Google Play.
QR Code
- Please check the smart phone is connected to the Internet and the communication is good.
- Before going to the site, please registered an account and sign once in an internet-connected environment.
ATTENTION
iOS
Android
Google Play and the Google Play logo
are trademarks of Google LLC.
About OS version
iOS: 8.0 and above
Android OS: Android 5.0 and above
14