MVBX2-X User’s Manual
38
CPU Features Setup
This “
CPU Features Setup
” let you install hardware monitoring parameters so that the
system can warn you when critical parameters are exceeded.
CPU Ration
Use this item to select a multiplier for the system front side bus frequency. The value of the
multiplier must be set so that :
Multiplier x Front Side Bus Frequency = CPU Clock Speed
For example, if you have a processor that is rated to run at 450MHz and the system is
running a front side bus frequency of 100MHz, you should select a multiplier of 4.5 so that
4.5 (Multiplier) x 100MHz (Front Side Bus) = 450MHz (CPU Clock)
Auto Detect DIMM / PCI Clk
If you enable this item, the system does not generate clock signals for unused PCI or DIMM
slots, so that EMI (electromagnetic interference) is reduced.
CPU Clock / Spread Spectrum
If you enable spread spectrum, the EMI generated by the system is greatly reduced.
CPU Warning Temperature
If you have installed hardware monitoring you can enable this item so that the system
gives a warning beep when critical CPU temperatures are exceeded.
