MVBX2-X User’s Manual
14
Step2:
Install the Slot1 Processor
z
This motherboard supports a wide range of Intel Slot1 processor include the SEPP
(Single Edge Processor Package) Celeron, the Pentium II and the Pentium III.
z
The SEPP Celeron uses a Pentium II processor with 32K of internal level 1 cache
memory and 128K of external level 2 cache memory. Clock speed run from
266MHz through to 433MHz. They operate over a 66MHz system bus.
z
The Pentium II processor is supported with 32K of internal level 1 cache memory
and 512K of external level 2 cache memory. Clock speed run from 233MHz
through to 450MHz. All but the slowest Pentium II’s operate over a 100MHz
system bus.
z
The Pentium III processor is identical to the Pentium II processor except that it has
added instructions that are designed to improve performance in areas such as
the internet, encoding and decoding of compressed audio and video files and
soon. Currently, the Pentium III processor ships with clock speeds of
450MHz, 500MHz, 550MHz, 600MHz, and 667MHz. Pentium III’s operate
over a 100/133MHz system bus.
z
The MVBX2-X motherboard provides a Universal Retention Module for Pentium
II/III and Celeron processor in SECC, SECC2 and SEPP. Please check URM
well setup on the motherboard already.
z
Follow the steps mentioned below to install the Slot1 processor :
z
Before the processor install, you have to make sure that the EAR of the
URM open already.
Jumper Cap
Function
Short Pin 1-2
Safe Mode
Open Pin 1-2
Normal Operation
2
1
