M81-X Series User’s Manual
18
Or allows you to power on the system by double click (Right Key) or (Left Key) of
mouse for wake up your system from sleep state.
5.19. Processor Type Setting Header “JP2”
It is a 2-Pin header that used for Processor type setting.
JP2 Pin1-2 shorted by a jumper cap that supported for Slot1 Processors.
JP2 Pin1-2 opened (or placed on just a single pin) that supported for PPGA370
Processors.
5.20. Power Connector “ATX1”
It has a single lead connector with a clip on one side of the plastic housing. There is
only one way to plug the lead into the power connector “ATX1”. Press the lead
connector down until the clip snaps into place and secures the lead on to the connector.
Jumper Cap
Function
Short Pin 1-2
Support Slot1
Open Pin 1-2
Support PP GA370
1
2
1
2
Jumper Cap
Function
Short Pin 1-2
Wake-up Enable
Open Pin 1-2
Wake-up Disable
