M81-X Series User’s Manual
26
Step6: Front Panel I/O Connections
Follow the instruction carefully for proper connections to your front panel display
and control.
Power SW
Reset SW
HDD LED
Power LED
Key Lock.
(If you have a speaker on the chassis that we recommend not to use them
because it will have buzzer noise when the system is booted.)
Step7: ATX1 / HDD / FDD Power Connection
Connect ATXPWR of the power supply unit to the ATX1 connector on the
motherboard.
Connect HDDPWR of the power supply unit to the power connector on the HDD
device.
Connect FDDPWR of the power supply unit to the power connector on the FDD
device.
Note : Incorrect installation of the power supply could result in serious damage
to the motherboard and connected peripherals. Make sure the power supply is
unplugged from the AC outlet before connecting the leads from the power supply.
Step8: Back I/O Connections
Follow the instruction carefully for proper connection I/O peripherals to your
system.
Keyboard
Mouse
Monitor
AC power cord.
Step9: Boot the system
You are now ready to boot the system for the first time. Please continue to the
next section to configure your BIOS (Basic Input Output System) setting. It must
be configured after booting.
