M81-X Series User’s Manual
44
and it will appear in exactly the same state as it was before it was suspended to
RAM.
The available options for ACPI Suspend Type are : [S1(POS)] [S3(STR)].
7.5.3 Power Management [User Define]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
These items acts like a master switch for the power saving mode and hard disk
timeout.
[User Define] : Set to User Define to choose your own timeout for the power
saving modes.
[Min Saving] : Set to Min Saving, power saving modes occur after a longer timeout.
[Max Saving] : Set to Max Saving, power saving modes occur after a short timeout.
Suspend Mode item lets you set the period of time after which the system enters into
suspend mode. The suspend mode can be power on suspend or suspend to hard
drive. HDD Power Down item lets you set the IDE HDD idle time before the device
enters the power down state.
The available options for Power Management are : [User Define] [Min Saving] [Max
Saving].
The available options for Suspend Mode are : [Disabled] [Enabled].
The available options for HDD Power Down are : [Disabled] [Enabled].
7.5.4 Video Off Method [V/H SYNC+Blank]
This item set the video off method in power saving mode.
[V/H SYNC + Blank] : BIOS will blanks the screen and turn off vertical and hori-
zontal scanning when gets into power saving mode.
[DPMS] : This function applies only for DPMS (Display Power Management
Standard) monitor. BIOS will use DPMS to control VGA display controller.
[Blank Screen] : Only blanks the screen when gets into power saving mode.
The available options for Video Off Method are : [V/H SYNC+Blank] [DPMS] [Blank
Screen] .
7.5.5 Video Off In Suspend [Yes]
It is define if the Video is powered down when the system is put into suspend mode.
The available options for Video Off In Suspend are : [Yes] [No].
