7
Quick Installation Guide for Solar Power Inverter M50A_12s EU V4 EN 2018-10-24
Planning the installation
Installation location
► The inverter is very heavy The wall or mounting system
must be able to bear the heavy weight of the inverter
► Always use the mounting plate supplied with the inverter
► Use mounting materials (dowels, screws etc ) that are
suitable for the wall or the mounting system, as well as the
heavy weight of the inverter
► Mount the inverter on a vibration-free wall to avoid malfunc-
tions
► When using the inverter in residential areas or in buildings
with animals, possible noise emissions can be disturbing
Therefore, carefully choose the place of installation
► Mount the inverter on a fireproof wall.
✔
✘
✘
??
??
► Attach the inverter so that the information on the display
can be read and the buttons can be operated without any
problems
Mounting alignment
► Mount the inverter vertically
Outdoor installations
► The inverter has a protection degree of IP65 and can be
installed indoors and outdoors Despite this, the inverter
should be protected by a roof against direct solar irradia-
tion, rain and snow
For example, the power of the inverter will be reduced if it is
too heavily heated by solar radiation This is normal operat-
ing behavior for the inverter and is necessary to protect the
internal electronics
► In areas with many trees or fields, pollen and other plant
material can clog the air inlets or fans
In this case, cover the air inlets without impeding the air
flow through the inverter. Regularly clean and test the cool-
ing system, see Installation and Operating Instructions
