22
Quick Installation Guide for Solar Power Inverter M50A_12s EU V4 EN 2018-10-24
Yes / No
ID: 1
Are you sure to set
8.
Check that the correct inverter ID is set
If the correct inverter ID is selected, use the
and
buttons to select the
Yes
entry and the press the
ENT
button
Press the
EXIT
button to change the selection
12.Jun 2016 15:32
9.
Press the
and
buttons to select the entry
Date and time
and press the
ENT
button
E-Today: 0kWh
Power: 0W
Status: On Grid
12.Jun 2016 16:02
þ
The basic settings are now complete The standard menu is displayed
Commissioning – basic settings
Date and time
E-Today: 0kWh
Power: 0W
Status: On Grid
12.Jun 2016 16:02
1.
If the default information is displayed, press the
EXIT
button to open the main menu
Otherwise, press the
EXIT
button repeatedly until the main menu is displayed
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2.
Use the
and
buttons to select the
General Settings
entry and then press
the
ENT
button
Protocoll
Baud rate
Date & Time
Language
3.
Press the
and
buttons to select the entry
Date and time
and press the
ENT
button
12.Jun 2016 17:15
4.
Use the
and
buttons to configure the value and then press the
ENT
button
Repeat the procedure for the other settings
Commissioning – further settings (optional)
