Delta M250HV, Инструкции по установке и вводу в эксплуатацию

Страница: 31 / 38

31 Installation manual M250HV_112 (RPI254M112000) Product Version 0 EU V1.0 EN 2022-04-11
Rating plate and markings on the inverter
Information on the rating plate
Meaning
M250V_112 Delta model name
P/N: RPI254M112000 Delta part number
DC input
DC input
Max. Input voltage: 1500 V DC Maximum operating input voltage
MPP voltage range/MPP 820 ~ 1350 VDC MPP input voltage range
Max. input current: 312 A DC
Total maximum DC input current
Max. allowable array ISC: 60 A per MPPT
Maximum DC short-circuit current per MPP tracker
AC output
AC output
Nominal output voltage: 800 V AC Rated output voltage
Nominal output frequency: 50/60 Hz Rated frequency
Connection type: 3Ø3W, PE
The inverter can be connected to 3-phase networks without a neutral conductor
(3 phases, 3 PE).
Max. continuous output current: 180.5 A AC Maximum output current
Rated continuous output power: 250,000 W Rated output power
Max. apparent output power: 250000 VA Maximum apparent power
Power factor: 0.8 lead ~ 0.8 lag
Setting range of the power factor cos φ
Protection class: I Safety class as per EN 61140
Overvoltage category: III (AC), II (DC) Overvoltage category for AC and DC as per EN 50539-11
Ingress protection: IP66 Protection degree according to EN 60529
Operating temperature range: -30 ~ +60°C Operating temperature range
Non-isolated inverter The inverter has no galvanic isolation.
Made in China The device was made in China.
IEC 61439-2 The inverter meets the requirements of IEC61439-2.
Place of manufacture:
No. 1688 Jiangxing East Road,
Wujiang Economic Development Zone
Suzhou City, 215200 Jiangsu Province, P.R.China
The address of the production site.
Authorized representative
Delta Electronics (Netherlands) B.V.
Zandsteen 15, 2132 MZ Hoofddorp,
The Netherlands
The address of the authorized contact person for this product in the EU.
CE mark. By applying this mark, Delta declares that the inverter satisfies the
provisions of the applicable EU directives.