10
Quick Installation Guide for Solar Power Inverter M125HV EU V1 EN 2019-04-01
Installation location
► The inverter is very heavy. The wall or mounting system
must be able to bear the heavy weight of the inverter.
► Always use the mounting plates supplied with the inverter.
► Use mounting materials (dowels, screws etc.) that are
suitable for the wall or the mounting system, as well as the
heavy weight of the inverter.
► Mount the inverter on a vibration-free wall to avoid disrup-
tions.
► When using the inverter in residential areas or in buildings
with animals, possible noise emissions can be disturbing.
Therefore, carefully choose the place of installation.
► Mount the inverter on a fireproof wall.
Mounting alignment
Outdoor installations
► The inverter has a protection degree of IP65 and can be
installed indoors and outdoors. Despite this, the inverter
should be protected by a roof against direct solar irradia-
tion, rain and snow. For example, the power of the inverter
will be reduced if it is too heavily heated by solar radiation.
This is normal operating behavior for the inverter and is
necessary to protect the internal electronics.
Planning the installation
Lifting and transporting the inverter
► Screw the M12 eyebolts onto the top side of the inverter.
The screw eyebolts are not included in the scope of deliv-
ery.
► Lift the inverter using a block and tackle or crane.
