Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support [email protected]
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
14
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support [email protected]
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
15
Display on the remote socket without
dimmer
• The control lamp illuminates when the remote socket is switched
on.
• The control lamp is off when the remote socket is switched on.
Display on the remote socket with dimmer
• The control lamp illuminates when the remote socket is switched
off and the connected lamp is switched on.
• The control lamp is off when the remote socket is switched off and
the connected lamp is also switched off.
• The control lamp is off when the remote socket is switched on and
the connected lamp is also switched on.
• When dimming the lamp, the control lamp on the remote socket
becomes lighter and lighter until the lamp is completely switched off
and the control lamp has reached its maximum brightness.
• When brightening the lamp, the control lamp on the remote socket
becomes darker and darker until the lamp has reached its maximum
brightness and the control lamp has completely switched off.
Installation of the remote sockets
Prior to initial operation of the remote sockets, please press the
NEW CODE button with a pen in the battery compartment of the
remote control, after you have inserted the batteries.
Note:
By pressing the NEW CODE button, the factory code settings
are deleted and a new, random code is created. This reduces the
likelihood of overlapping of the radio signals of the remote control
with other devices.
Plug one of the remote sockets into the wall socket intended for
use, and then plug a consumer (e.g. a lamp) into the remote socket.
Note:
Connect suitable lamps to the dimmable remote sockets! Please
ensure that you adhere to the information from the “Connection
of devices” section.
Switch your consumer on and then press the button
on the
remote socket briefly.
If you press the /
button briefly again, your consumer will
switch off again.
If the remote socket is already removed from the socket after a
very short period of operation, the programming could be lost and
must be repeated. In normal operation, the programming can be
saved for approx. 1 hour after being disconnected from the mains.
Preparatory measures
Preparatory measures
