Delta H5E 220, Руководство по эксплуатации и установке

Страница: 7 / 56

2 Installation and Wiring
2.1 Instruction before Installation
Due to the variety of users and installation environments, you must read this
manual thoroughly before installation. Installation of the unit and start-up
procedures must be carried out by an accredited technician.
Upon receiving your brand new RPI inverter, you will be required to remove it’s
protective packaging. This packaging consists of various materials that will need
to be disposed of according to the specific recycling marking printed on them.
2.2 Unpacking
Unpacking process is shown as Figure 2-1.
Figure 2-1 : Unpacking process
If there is any visible damage to the inverter/accesories or any damage to the
packaging, please contact your inverter supplier before installation.
CAUTION !
7
Installation and Wiring