Delta CP.0.DPS Series, Руководство по эксплуатации

Страница: 4 / 41

4
INTRODUCTION
electric pulling winches are designed for pulling and lifting load in a safe working
environment. The user is responsible for correct operation and must always make sure that the load
weight doesn't exceed the rated capacity. If used for lifting purposes, please contact a professional
and carry out a risk analysis. Also any modifications made on the electric pulling winch is the sole
responsibility of the user / owner.
will not be responsible for any problems caused by
modifications, wrong use, or any other abnormal situation.
electric winches are in compliance with the safety factor and further safety requirements in
conformity with the European Communities Machinery Directives 2006/42/EC.
Illustrations are for the general understanding and may differ from the actual versions
reserve the right to change materials or design, if, in our opinion, such changes will improve
our product. For the correct use of the electric winch, operation and maintenance instructions
must be followed. Abuse, repair by an unauthorized person, or use of non- replacement parts
voids the guarantee and could lead to dangerous operation.
Please read the instructions carefully before using this product.
1. Mark definition
electric winch are designed for pulling load, which has to be used under normal working
conditions. It is strictly forbidden to pull or lift persons. The manual use the below markings to
identify the level and grade of danger.
DANGER
Very dangerous situation, if the danger is not avoided, it will cause
death or serious injury.
WARNING
Potential dangerous situations, means if the warning is not heeded, it
can cause death or serious injury.
CAUTION
Pre-caution needed, if the precaution is not taken, it may cause minor or
moderate injury.
According to these instructions, caution markings can also lead to serious injuries. Therefore is
important to follow the safety instructions in this manual, but also use common sense when using
electric winches.
2. Safety instructions
2.1 General rules
Wrong use or lack of maintenance can lead to dangerous situations, which has to be taken seriously
during and after use. For example, a dangerous situation as where the load cannot be pulled or lowered
to a stable and flat underground.
Before installation, operation or maintenance , please read the content of the manual and obey all
safety, operation, maintenance instructions.
We will not be responsible for any problems caused by modifications, wrong use, or any other
abnormal situation. If the products was not use in nonstandard application, please advise with the
local distributor in advance. Also you need to make a risk analysis by a professional to avoid very
dangerous situations.