2
PRECAUTION – SAFETY WARNINGS
The user of the
electric pulling winch must always check if guidelines are followed,
which you can find in this manual. Also he/she needs to understand the manual and user
instructions completely for safety purposes. Please note that if not followed or understood
correctly, potential risks are even greater and can lead to severe injuries or equipment
damage. Therefore it is always recommended to save this manual correctly, accessible for
the any person who is going to use it.
Never use or install
electric pulling winch before understanding the user manual
completely.
electric pulling winch may only be used by qualified personnel of age. Make sure
that people who are using this for the first time are familiar with the correct operation
instructions and have knowledge about the safety requirements. The user must have a
good mental and physical condition.
Never remove the nameplate, operating and warning labels. Do not use this product
without.
Do not exceed the rated capacity, which you can find on the nameplate. If not, do not use.
Always make sure that the supporting structures and additional pulling equipment are
rated equally or higher to support the rated capacity of
electric winch.
Before installing, make sure that
electric pulling winch, wire rope, and other
components are visibly in good condition. After installing periodically inspect these, to
make sure that this is kept. If not, please contact your supplier or another professional.
The ambient temperature of
electric winch and load must be between -10 °C / + 40
degrees °C
A technical study by a professional must be carried out before instalment to prevent any
risks.
Make sure that the electric pulling winch is correctly mounted with the pre-designed
holes. Make sure that bolt and nuts are tightly secured.
Never use the
electric pulling winch for pulling, lifting, supporting or transporting
people.
Never lift loads over or in close proximity of people.
Always inform the surroundings that the pulling / lifting procedure is going to start. Make
sure that no obstacles are in between the winch and the load.
People may never walk under the suspended load or stand in close proximity. (Danger
zone) Never let people stand near the load. Make it clear. Never leave load unattended.
Maintenance and repairs must be done by professionals and qualified companies. Always
use
spare parts. Always make sure to keep a journal.
Never operate a damaged or malfunctioning
electric pulling winch. Always re-test
the electric winch after reparation.
If you have any questions ,please contact your supplier.
Содержание CP.0.DPS Series
