Delta CP.0.DPS Series, Руководство по эксплуатации

Страница: 13 / 41

13
5.3 Initial lubrication
The following lubrication guidelines must be carried out before the electric winch is put into use. (or
use an equivalent.)
Model
DPS.200 DPS.250 DPS.300 DPS.500 DPT.30075
Lifting capacity (kg) 200 250 300 500 300
Duty Cycle 40%
Voltage (v) 230 230 230 230 400
IP rating 44 44 44 44 44
Lubricant of gearbox Recommended SHELL Gadus S3 V220C 2 grease or equilavant
Lubricant quantity gearbox 0.5 lt 0.5 lt 0.5 lt 0.75 lt 0.5 lt
Lubrication period 6 months or 240 working hours
Lubricant of wire rope Recommended SAE 30 motor oil or equilavant
Lubrication Heavy Service: daily / Normal: weekly / Infrequent: Monthly
Model DPT.30151 DPT.30375 DPT.30750 DPT.31500 DPT.34000
Lifting capacity (kg) 500 1000 2000 3000 5000
Duty Cycle 40%
Voltage (v) 400
IP rating 44 54 54 54 54
Lubricant of gearbox Recommended SHELL Gadus S3 V220C 2 grease or equilavant
Lubricant quantity gearbox 0.75 lt 2.3 lt 3 lt 3 lt 3 lt
Lubrication period 6 months or 240 working hours
Lubricant of wire rope Recommended SAE 30 motor oil or equilavant
Lubrication Heavy Service: daily / Normal: weekly / Infrequent: Monthly
5.4 Connection to electrical supply
An adequate electricity supply system is required along the total length of travel(where appropriate).
The supply voltage and frequency at which the winch operates is marked on the motor rating plate. It
is Imperative to check before connecting the unit that these figures correspond with those of the
supply voltage.
5.5 Starting
When installation is completed, the following procedure should be carried out:
1. Isolate the power supply.
2. Check that all mechanical and electrical joints and connections are tight and secure.
3. Switch on power supply.
4.
Operate the electric winch and check that the operation is smooth at all times.
5. Check the brake, under light and full load conditions.
6 Always check the correct functioning of the emergency stop.
DANGER
Emergency procedure: In the event of a blocked steel wire or any other
malfunction of electric pulling winch, immediately stop the maneuverer
without attempting any further actions. Immediately set up a safety perimeter
around the winch and the load to prevent access by any unauthorized persons.
Call in the necessary personnel to remove the load and intervene on the winch.