Delta OHM HD50 14b7P TC, Руководство по эксплуатации

Страница: 35 / 58

HD50
- 35 -
V1.4
Address Type Holding Register description
1009 +
200 x ( N -1)
SW Higher alarm threshold for temperature with 3-wire Pt1000 sensor of
channel N in the set measurement unit (x10).
1010 +
200 x ( N -1)
SW Lower alarm threshold for
TEMPERATURE
with 4-wire Pt1000 sensor of
channel N in the set measurement unit (x10).
1011 +
200 x ( N -1)
SW Higher alarm threshold for temperature with 4-wire Pt1000 sensor of
channel N in the set measurement unit (x10).
1012 +
200 x ( N -1) SW
Lower alarm threshold for
TEMPERATURE
with TC_K sensor of channel N in
the set measurement unit (x10).
1013 +
200 x ( N -1)
SW Higher alarm threshold for temperature with TC_K sensor of channel N in
the set measurement unit (x10).
1014 +
200 x ( N -1)
SW Lower alarm threshold for
TEMPERATURE
with TC_J sensor of channel N in
the set measurement unit (x10).
1015 +
200 x ( N -1) SW
Higher alarm threshold for temperature with TC_J sensor of channel N in
the set measurement unit (x10).
1016 +
200 x ( N -1)
SW Lower alarm threshold for
TEMPERATURE
with TC_T sensor of channel N in
the set measurement unit (x10).
1017 +
200 x ( N -1)
SW Higher alarm threshold for temperature with TC_T sensor of channel N in
the set measurement unit (x10).
1018 +
200 x ( N -1) SW
Lower alarm threshold for
TEMPERATURE
with TC_N sensor of channel N in
the set measurement unit (x10).
1019 +
200 x ( N -1)
SW Higher alarm threshold for temperature with TC_N sensor of channel N in
the set measurement unit (x10).
1026 +
200 x ( N -1)
SW Lower alarm threshold for
TEMPERATURE
with TC_E sensor of channel N in
the set measurement unit (x10).
1027 +
200 x ( N -1) SW
Higher alarm threshold for temperature with TC_E sensor of channel N in
the set measurement unit (x10).
1028 +
200 x ( N -1)
SW Channel
N lower alarm threshold in mV (x10). Only if channel N is con-
figured as 0…1 V input.
1029 +
200 x ( N -1)
SW Channel
N higher alarm threshold in mV (x10). Only if channel N is con-
figured as 0…1 V input.
1030 +
200 x ( N -1) SW
Channel N lower alarm threshold in mV (x100). Only if channel N is con-
figured as 0…50 mV input.
1031 +
200 x ( N -1)
SW Channel
N higher alarm threshold in mV (x100). Only if channel N is
configured as 0…50 mV input.
1032 +
200 x ( N -1)
SW Channel
N lower alarm threshold in mA (x100). Only if channel N is con-
figured as 4…20 mA input.
1033 +
200 x ( N -1) SW
Channel N higher alarm threshold in mA (x100). Only if channel N is
configured as 4…20 mA input.
1034 +
200 x ( N -1)
SW Channel
N lower alarm threshold in % . Only if channel N is configured
as potentiometric input.
1035 +
200 x ( N -1)
SW Channel
N higher alarm threshold in % . Only if channel N is configured
as potentiometric input.
1036 +
200 x ( N -1) SW
Lower alarm threshold expressed as value of the quantity associated to
channel N when the channel is configured as mapped 0…1 V input.
1037 +
200 x ( N -1)
SW Higher alarm threshold expressed as value of the quantity associated to
channel N when the channel is configured as mapped 0…1 V input.
1038 +
200 x ( N -1)
SW Lower alarm threshold expressed as value of the quantity associated to
channel N when the channel is configured as mapped 0…50 mV.
1039 +
200 x ( N -1) SW
Higher alarm threshold expressed as value of the quantity associated to
channel N when the channel is configured as mapped 0…50 mV.
1040 +
200 x ( N -1)
SW Lower alarm threshold expressed as value of the quantity associated to
channel N when the channel is configured as mapped 4…20 mA.