HD2013
- 7 -
V1.5
SW1 switch down, towards the EXTERNAL indication (see the figures 4 and 5): the
analog or SDI-12 output is disabled.
Fig. 3 – Connections of contact output and heating
Connection of analog output (only HD2013…A… and HD2013…V…):
Perform the connections as shown in figure 4
. Set the SW1 switch up, towards the IN-
TERNAL indication (the contact output is disabled).
Fig. 4 – Connections of analog output
Connector of the
cone heater
RESET line
GND
Analog output positive
Power supply positive
SW1 switch
