User’s Manual
62
When you pressing “
Y
” key to load the default values that are factory setting
for optimal performance system operations.
Set Supervisor / User Password
You can set either Supervisor or User Password, or both of them. The differ-
ences between are:
z
Supervisor Password
: Can enter and change the options of the setup menus.
z
User Password
: Just can only enter but do not have the right to change
the options of the setup menus.
When you select these function, the following message will appear at the
center of the screen to assist you in creating a password.
Type the password, up to eight characters in length, and press <
Enter
>
key. The password typed now will clear any previously entered pass-
word from CMOS memory. It will be asked to confirm the password, type
the password again and press <
Enter
> key, or you may also press <
Esc
>
key to abort the selection and not enter a password.
To disabled a password, just press <
Enter
> key when you are prompted
to enter the password. A message will confirm the password will be
