User’s Manual
56
The available options for Video Off Option are : [Suspend
Æ
Off] [All Modes
Æ
Off] [Always On].
Video Off Method
Deter mines the manner in which the monitor is blanked.
The Blank Screen option will let the system BIOS blank the screen when
disabling video. V/H SYNC + Blank will allow the system BIOS to turn off the
V-SYNC and H-SYNC signals running from the VGA interface to monitor.
z
[
V/H SYNC + Blank
] : System turns off vertical and horizontal synchroni-
zation ports and writes blank to the video buffer.
z
[
Blank Screen
] : System only writes blanks to the video buffer.
z
[
DPMS Support
] : Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the Video Electronics
Standard Association (VESA). Use the software supplied for your video
sub system to select video power management values.
The available options for Video Off Method are : [V/H SYNC + Blank] [Blank
Screen] [DPMS Support].
MOMEM Use IRQ
Allows you to determines the IRQ in which the modem can use.
The available options for MODEM Use IRQ are : [3] [1].
Soft-Off by PWRBTN
When you select Instant-Off or Delay 4 Sec., turning the system off with the
on/off button places the system in a very low power usage state, either im-
mediately or after 4 seconds, with only enough circuitry receiving power to
detect wake-up event activity.
The available options for Soft-Off by PWRBTN are : [Instant-Off] [Delay 4 Sec].
State After Power Failure
A traditional ATX system should remain at power off stage when AC power
