2. Hardware Installation
User’s Manual
35
z
One display monitor
z
One PS/2 mouse and one PS/2 keyboard
Of course you can use the system I/O ports and expansion slots to add
many more features and components to your system than the essential items
listed above. Verify the state or the connection, you are done. Now ready to
boot the system for the first time. Turn on the system and follow the on-
screen instructions for setup.
If the power cord is connected to the power control unit such as
the UPS, turn on the power control unit, also choose an appropriate
input voltage for your system.
While the tests are running, additional messages will appear on
the screen. If you do not see anything within 30 seconds from the
time you run on the power, the system may have failed a power-on
test. Recheck your jumper setting and connections or call your
retailer for assistance.
Make sure to power off the system before connecting or discon-
necting cable between the system and peripheral devices. Con-
necting or disconnecting the cables while the system is powered
may cause malfunctions or failures of the system.
Verify that the access LED on the system is unlit before turn off
the system or ejecting the CD-ROM or floppy disk. Doing so while
the access LED is lit may damage the data being stored or the
CD-ROM or floppy disk.
When you have just turn off the system, wait at least 10 seconds
before turning it back on. Immediate power cycling may cause
malfunctions or failures of the system.
