Ethernet Communication Module DVPEN01-SL
DVP-PLC Application Manual
26
1.
Modify:
Check the box to modify the password.
2. New
Password:
Maximum 4 characters are allowed. Leave the column “blank” to disable the password
protection function.
3. Confirm
Password:
Enter the new password again.
4. See “Application Examples Section 6.4” for more details.
Note:
After the password is locked, all the pages cannot be set up unless you unlock the password.
However, if you set up DVPEN01-SL by RS-232, you can return the setting to default setting
whether the password is locked or not. For example, if you have locked DVPEN01-SL but forget
the password, you have to return DVPEN01-SL to factory default setting by RS-232, and all the
settings will return to default ones.
5.9 Returning to Default Setting
If you need to clear all the settings after many modifications on the settings and return the settings to default
ones, check the “default setting” box.
Setting up DVPEN01-SL returning to default setting
Содержание Ethernet Communication Module DVPEN01-SL
Страница 1: ...DVPEN01 SL Ethernet Communication Module Application Manual ...
Страница 2: ......
Страница 54: ...Ethernet Communication Module DVPEN01 SL DVP PLC Application Manual 52 MEMO ...