10
Bassinet Base Assembly - continued
5
Continue to Step 6...
Insert Support Tube (E) into Rocker Legs
(D). Push in on the snap button. Then
slide the Support Tube down until the
snap button locks into place.
Note: Make sure holes on Support Tubes
face in.
E
02503
- Support
Tube
(x1)
E
D
Parts Needed:
BASSINET BASE ASSEMBLY
19
BASSINET BASKET ASSEMBLY
15
Continue to Step 16...
Parts Needed:
Bassinet Basket Assembly - continued
Insert the two ends of the Canopy (S)
through the openings in the Bassinet
Fabric and into the connectors on the
Bassinet Basket Frame. Push down until
both sides snap into place (
see Figure 1
).
Then locate the two snaps on the Canopy
(near the connectors ). Snap into place (
see
Figure 1).
Attach the velcro or snap at the
back of the Canopy to the bassinet skirt
(
see
Figure 2 & 2a
).
Figure 2
Figure 1
00073
- Canopy
(x1)
S
Snap
Button
Figure 2a
